Simrad HH36 User Manual

Simrad - HH36 Installation and Operation Instructions56
TOM
DSC TEST
►SEND?
DSC TEST
MANUAL NEW
SAM
►TOM
DSC CALL
LL REQUEST▲
TRACK BUDDY
►DSC TEST ▼
TOM
DSC TEST
WAIT.. 00:17
6. If there is no reply after 30 seconds, the radio asks you if you want to retry.
5-11-2 Receiving an incoming DSC TEST call reply (DSC TEST ACK)
1. When you receive notication of a DSC TEST reply, press SILENC softkey to silence
the alert.
2. If the radio recognizes the user MMSI as one of your buddies, the buddy’s name is
displayed in place of the user MMSI.
5-11-3 Acknowledging an incoming DSC TEST call
The radio sounds a friendly two-tone alert when it detects an incoming DSC TEST call.
Note: If TEST REPLY is set to AUTO, no sound will be emitted.
1. If the radio recognizes the MMSI as one of your buddies, your buddy’s name is
displayed in place of the MMSI.
2. Press SILENC softkey to silence the alert.
3. The radio will automatically acknowledge the call if TEST REPLY is set to AUTO (See
section 4-8-7) and after a TIMEOUT period set for AUTO REPLY (See section 4-8-8).
TOM
AUTO ACK
IN 10S
◄ ► 00:02
TEST
CALL FROM
TOM
► 00:01
4. Alternatively, if TEST REPLY is set to MANUAL, a manual response is required, press
ACK softkey to acknowledge the DSC Test Call.
TOM
AUTO ACK
IS OFF
◄ ► 00:02
TEST
CALL FROM
TOM
► 00:01
5. Press +/- button or rotate the CH knob to scroll any further information (if available),
or press EXIT to cancel.
5-12 View User MMSI and GPS information
The radio’s MMSI can be viewed as well as the current position.

Simrad HH36 Specifications

General

Brand	Simrad
Model	HH36
Category	Radio
Language	English