Simrad HH36 - GPS, Radio, and DSC;ATIS Settings

Simrad - HH36 Installation and Operation Instructions28
3. Select DELETE then select YES.
4. The buddy name is deleted and the revised buddy list is displayed.
4-5 Contrast adjustment
1. Select CONTRAST and press ENTER. There are 8 contrast levels. The higher the
numbers, the darker LCD screen.
2. SQ / to adjust the setting, Press ENTER to conrm the setting and return to the
MENU SELECT.
MENU SELECT
LAMP ▲
BUDDY LIST
►CONTRAST ▼
CONTRAST
■ ■ ■ ■
LO HI
4-6 GPS/DATA
You can use the GPS/DATA menu to:
• manually enter your position data
• manually enter the time data
• show or hide your position
• show or hide the time
• oset the UTC time to show your local time
• format the time display
• show or hide your course (COG) and speed (SOG)
• turn GPS ENABLE ON/OFF
• set True or Magnetic Bearing
• turn NO GPS DATA alarm sound ON/OFF.
Note: This information is important because it will be used if you send a DISTRESS call.
If GPS data is not available, the NO GPS alert will sound for 5 seconds (or until you press
any button) and the screen will request you to enter the position data manually.
This will repeat every 4 hours if you do not enter the position data manually. After you
have entered the position data, you must update it within 23.5 hours otherwise NO GPS
alert sequence repeats.