Simrad HH36 User Manual

Simrad - HH36 Installation and Operation Instructions 51
channels cannot usually be called, however, If you wish to use a Duplex channel,
select MANUAL instead, then select your channel of choice.
4. The call details are shown. Press ENTER to send the call. The Tx symbol is displayed
on the LCD while the call is being sent.
5-6 Send an All Ships call (ALL SHIPS)
DSC CALL
LAST CALL ▲
GROUP
►ALL SHIPS ▼
ALL SHIPS
►SAFETY
URGENCY
CHOOSE CH
►INTER-SHIP
MANUAL
ALL SHIPS
SAFETY
►SEND?
1. Select DSC CALL then ALL SHIPS.
2. Select one of the following call priorities:
• SAFETY To send safety information to all other vessels in range.
• URGENCY For use when a serious situation or problem arises that could lead to
a distress situation.
3. Choose a working channel to talk on. Select the INTER-SHIP and press ENTER. The
radio automatically lists all Inter-ship (Simplex) channels that can be used. Duplex
channels cannot usually be called, however, If you wish to use a Duplex channel,
select MANUAL instead, then select your channel of choice.
4. The call details are shown. Press ENTER to send the call. The Tx symbol is displayed
on the LCD while the call is being sent.
5-7 Send using the Call Log (CALL LOG)
The Call Log contains the contact details for the 20 most recent incoming calls, so that
you can call any of them again quickly.
DSC CALL
GROUP ▲
ALL SHIPS
►CALL LOG ▼
11 12345678
INDIVIDUAL
ROUTINE
09:45 UTC
11 12345678
►CALL BACK
DELETE
SAVE MMSI
CHOOSE CH
►INTER-SHIP
MANUAL
12345678
INDIVIDUAL
ROUTINE
►SEND?
1. Select DSC CALL then CALL LOG.
2. The radio displays the contact details for the most recent incoming call as the rst

Simrad HH36 Specifications

General

Brand	Simrad
Model	HH36
Category	Radio
Language	English