Simrad HH36 User Manual

Simrad - HH36 Installation and Operation Instructions46
4-11 Track log
Set the distance interval to 25 m, 50 m, or 100 m for recording the track points when
navigating.
MENU SELECT
ATIS SETUP▲
GET BUDDY
►TRACK LOG ▼
TRACK LOG
25M
►50M
100M
1. Select TRACK LOG, then press ENTER, the 25 m, 50 m, 100 m appear on the screen.
2. Select your desired and press ENTER to conrm.
4-12 Erase track
Erase the TRACK HISTORY from the plotter screen.
MENU SELECT
GET BUDDY ▲
TRACK LOG
►ERASE TRAC▼
ERASE TRACK
YES
►NO
1. Select ERASE TRACK, then press ENTER, the radio asks for conrmation.
2. Select Yes, then press ENTER to erase the track line of the plotter screen.
4-13 Reset (Reset to factory defaults)
Use RESET to return every setting on the radio to the factory defaults, except your MMSI,
Group MMSIs and ATIS MMSI.
1. Select RESET, press ENTER, the radio asks for conrmation.
2. Select yes, then press ENTER to reset the radio and return to the menu.
MENU SELECT
TRACK LOG ▲
ERASE TRACK
►RESET
RESET RADIO
ARE YOU SURE
YES
►NO

Simrad HH36 Specifications

General

Brand	Simrad
Model	HH36
Category	Radio
Language	English