Simrad - HH36 Installation and Operation Instructions68
7-3 Installing and removing the antenna
Make sure that the exible antenna is attached to the radio. Ensure that the radio is
turned OFF anytime that the antenna is not connected.
Installing the antenna:
Screw the antenna in a clockwise motion until it is securely locked into place.
Removing the antenna:
Unscrew the antenna in a anti-clockwise motion until it is removed (as illustrated below).
Note: Do not operate the radio or press PTT key without the antenna being installed.
WARNING
Never leave your radio in a closed car or trunk; the extremely high temperatures
generated in hot weather can damage the electronics.
To Next Page
Loading...
Need help?
General
