Simrad - HH36 Installation and Operation Instructions 53
Station (MMSI begins with 00) the radio will recognize this and specify the correct
channel to talk on.
6. The call details are shown. Press ENTER to send the call. The Tx symbol is displayed
on the LCD while the call is being sent.
5-9 Request the LL position of a buddy (LL REQUEST)
DSC CALL
DISTRS LOG▲
SENT CALL
►LL REQUEST▼
LL REQUEST
►STARFISH
SEAROSE
MERMAID IV
STARFISH
LL REQUEST
►SEND?
STARFISH
LL REQUEST
CALLING...
STARFISH
LL REQUEST
WAIT.. 00:00
1. Press CALL to enter DSC mode, then select LL REQUEST.
2. Select the buddy whose LL position you want to request then press ENTER to send
the request.
3. The radio waits for an acknowledgement from your buddy. If there is no reply after
30 seconds the radio asks if you want to retry. Press ENTER to retry the call.
4. If the call is acknowledged, press SILENC softkey to silence the alert, press / keys
to scroll any further information about the call.
5-10 Track your buddy request (TRACK BUDDY)
Use the TRACK LIST option to select a buddy (or buddies) whose position you want to
track. Specify the time interval through the INTERVAL option, to start the track alterna-
tively. If the buddy name and time interval are already set to your preference, just start
tracking.
5-10-1 Add or delete a buddy (TRACKLIST)
ADD NEW
►KATHY
SEA ROSE
DSC CALL
SENT CALL ▲
LL REQUEST
►TRACK BUDD▼
TRACK BUDDY
START TRACK
SET BUDDY
►TRACKLIST ▼
TRACKLIST
►ADD NEW
SAM
To Next Page
Loading...
Need help?
General
