Simrad HH36 User Manual

Simrad - HH36 Installation and Operation Instructions34
4-7 Radio setup
The RADIO SETUP submenu is used to set up functions of the radio.
MENU SELECT
CONTRAST ▲
GPS/DATA
►RADIO SETU▼
4-7-1 Channel Bank selection (UIC)
Non-EU models only
You can select the: USA, International, or Canadian channel band. The channel bands are
listed in the appendix sections.
RADIO SETUP
►UIC
CH NAME
RING VOLUM▼
UIC
►USA
INT’L
CANADA
1. Select RADIO SETUP, the cursor is at UIC, press ENTER.
2. The cursor is at USA. If you want to select the International channel band, move the
cursor to INT’L. If you want to select the Canadian channel band, move the cursor to
CANADA.
3. Press ENTER to conrm your choice.
4. The new channel band is selected. Depending on your choice, the USA, INT’L, or
CAN icon is shown on the screen.
4-7-2 Channel name editing (CH NAME)
To setup the channel name to ON or to blank the rst line.
RADIO SETUP
UIC
►CH NAME
RING VOLUM▼
CH NAME
CALLING
CALLING
►EDIT
DELETE
1. Select RADIO SETUP, then CH NAME and press ENTER.
2. Select the desired channel name by using the CH / . Press ENTER then the screen
will show the channel name, EDIT and DELETE (Maximum of 12 characters).
3. Select EDIT and press ENTER to edit the existing name tag. Input the new name over
the existing one and press ENTER to display the YES/NO conrmation.

Simrad HH36 Specifications

General

Brand	Simrad
Model	HH36
Category	Radio
Language	English