Simrad HH36 User Manual

Simrad - HH36 Installation and Operation Instructions 39
4-8-2 Maintain groups (GROUP SETUP)
You can program up to three group MMSI numbers and associated Group names. Group
MMSI numbers always begin with a zero (0). You only enter the last 8 digits of the group
ID number, the intial ”0” is automatically entered.
4-8-2-1 Enter your groups
Use GROUP MMSI to create, edit, or delete up to 20 groups of people that you call
frequently. The entries within a group are stored in alphanumeric order. A group MMSI
always has nine numbers and always starts with 0.
A group name can have a maximum of 12 alphanumeric characters.
FISHER 1
012345678
►STORE
CANCEL
DSC SETUP
USER MMSI
►GROUP SETUP
INDIV REPL▼
GROUP SETUP
►MANUAL NEW
FISHING 1
GROUP NAME
- - - - - - - -
GROUP MMSI
0 - - - - - - -
1. Select DSC SETUP then GROUP SETUP.
2. If this is FIRST TIME that you’re entering a group name, no group appears. Otherwise,
any existing group names. The cursor is at MANUAL NEW.
3. Use CH / to enter the new group name, one alphanumeric character at a time.
4. Press ENTER to conrm each correct alphanumeric character and to move to the
next position.
5. When you have entered the group name, push ENTER so the cursor moves to the
MMSI line.
6. Use CH / to enter the MMSI associated with that group name, one number at a
time. Pushes ENTER to conrm a number and move to the next position.
7. If you make an error, select the < character then press ENTER.
8. When you have entered the last number of the MMSI, a new screen appears
automatically.
9. The cursor is at STORE, check that it is correct and, if so push ENTER to save the new
entry. (If it is not correct, select EXIT).

Simrad HH36 Specifications

General

Brand	Simrad
Model	HH36
Category	Radio
Language	English