Sinoboom TB20J Plus - Responsibilities of Relevant Parties; Owners (or Lessors); Responsibilities; Employersresponsibilities

TB20J Plus Operation Manual
17
© Feb. 2023
3 RESPONSIBILITIES OF RELEVANT
PARTIES
3.1 OWNER’S (OR LESSOR’S)
RESPONSIBILITIES
• The owner (or lessor) is obliged to help the user
understand all the instructions in the manual.
• The owner (or lessor) is obliged to provide the latest
manuals or replace missing or damaged labels. For
the latest manuals of the machine, please contact Si-
noboom or its authorized agents.
• The owner (or lessor) is obliged to comply with local
regulatory requirements related to the use of the
machine.
3.2 EMPLOYER’S
RESPONSIBILITIES
• The employer is obliged to issue an operator license
for the user.
• The employer is obliged to ensure that the user is
healthy and has good judgment, sense of coopera-
tion and psychological quality.
• The employer is obliged to ensure that signalmen
have good visual and auditory judgment, master
standard command signals and send clear and accu-
rate signals, and have sufficient experience to identi-
fy hazards and inform operators to avoid hazards in
time.
• The employer is obliged to clarify the corresponding
safety responsibilities to each operator and require
them to report unsafe factors to the supervisor
timely.
3.3 TRAINER’S RESPONSIBILITIES
• The trainer must be accredited by Sinoboom as who
has received comprehensive knowledge training on
the machine, and has the required competencies re-
lated to machine repair and maintenance.
• The trainer must conduct training in an open area
free of hazards until the trainees acquire the ability
to safely control and operate the machine.
3.4 USER’S RESPONSIBILITIES
• The user must be properly trained on MEWP and
authorized.
• The user must carefully read and fully understand
this manual and the decals on the machine.
• The user must report to the owner (lessor) all
anomalies that may cause the machine to work ab-
normally or have potential dangers, and if possible,
correct the abnormal situation timely while ensuring
safety.
• The user must be fully aware of the content and pro-
cedures of the operation item.
• The user must be familiar with and comply with sig-
nal instructions and operation requirements in emer-
gency situations.
• The user must observe the presence of dangerous
situations and report the hazard reminder to other
operators and watchouts in time. Such as high-volt-
age lines, unrelated personnel, and unfavorable
ground conditions.
• The user must stop using the machine in case of un-
favorable operation or dangerous conditions.