Sinoboom TB20J Plus - Oil Requirements

© Feb. 2023
56
TB20J Plus Operation Manual
MAINTENANCE
10.2 OIL REQUIREMENTS
NOTICE
• Please choose appropriate oil according to the
ambient temperature and local regulations, and
the use of unqualified oil will damage the machine
components.
• Oils of different grades or viscosities should not be
mixed. The oil to be added must have the same
grade and viscosity as that of the oil being used by
the machine.
• If special oil is required by the environments or
users, please contact Sinoboom.
• Before filling oil, wait until the temperature of
the machine drops to room temperature, other-
wise it may cause splashes, burns or other
personal injury.
• It is strictly forbidden to use inferior oils. The
use of inferior oils will bring damage to the ma-
chine, and the resulting failure will not be guar-
anteed by Sinoboom.
Hydraulic Oil
The hydraulic oil filled when the machine leaves the fac-
tory is generally L-HV32 or L-HM46 or other hydraulic oil
required by customers. The environment temperature
varies from region to region, so choose the hydraulic oil
suitable for your region as suggested by the following
table.
Table 10-2
Applicable
environment
temperature
amer
Mobil Shell Castrol
0℃～40℃
(32℉～104℉)
L-HM46 DTE 10 Excel 46 S2M46
Hyspin AWH-M46
-25℃～25℃
(-13℉～77℉)
L-HV32 DTE 10 Excel 32 TELLUS-S3VE32
Hyspin HVI-32
＞40℃
(104℉)
L-HM68 DTE 10 Excel 68 S2M68
Hyspin AWH-M68
＜-30℃
(-22℉)
Special oil to be determined.
Gear Oil
The machine uses industrial gear oil with the viscosity
grade of 75W-90.
Fuel Oil
• The machine should be refueled in a well-ven-
tilated place with no flames, sparks, and other
hazards that may cause fire or explosion.
• Do not refuel the machine while the engine is
running.
This machine uses diesel oil as the fuel, and the diesel
oil filled in the factory is generally 0# diesel, which is
suitable for use in areas with ambient temperature
above 4℃ (39.2℉). The diesel oil has been basically
emptied when the machine leaves the factory, and the
user needs to fill diesel oil with appropriate grade ac-
cording to the ambient temperature and emission regu-
lations. The following table shows the recommended
ambient temperature for different grades of diesel oil:
Table 10-3
Grade
Recommended ambient
temperature
5#
Above 8℃ (46.4℉)
0#
Above 4℃ (39.2℉)
-10#
Above -5℃ (23℉)
-20#
Above -14℃ (39.2℉)