Sirona CEREC SpeedFire - Safety Instructions; Basic Safety Information

65 71 165 D3639
D3639.201.01.02.02 10.2016
11
Sirona Dental Systems GmbH 2Safety instructions
Operating Instructions CEREC SpeedFire 2.1Basic safety information
båÖäáëÜ
2
Safety instructions
2.1
Basic safety information
2.1.1 Prerequisites
2.1.2 Maintenance and repair
● The maintenance and repair of this unit may be performed only by
Sirona or by agencies authorized by Sirona.
● Components which have failed and influence the safety of the unit
must be replaced with original (OEM) spare parts.
Please request a certificate whenever you have such work performed. It
should include:
● The type and scope of work.
● Any changes made in the rated parameters or working range.
● Date, name of company and signature.
2.1.3 Modifications to the product
Modifications to this product which might affect the safety of the system
owner, patients or other persons are prohibited by law!
For reasons of product safety, this product may be operated only with
original FONA Dental accessories or third-party accessories expressly
approved by FONA Dental. The user assumes the risk of using non-
approved accessories.
2.1.4 Accessories
Product safety with the power cable
In order to ensure product safety, this device may be operated only with
original Sirona accessories or third-party accessories expressly approved
by Sirona. In particular, only the power cable supplied with the unit or the
corresponding original spare part may be used with the unit. The user is
responsible for any damage resulting from the use of non-approved
accessories.
NOTICE
Restrictions regarding installation site
The system is not intended for operation in areas subject to explosion
hazards.
NOTICE
Do not damage the unit!
The unit can be damaged if opened improperly.
It is expressly prohibited to open the unit with tools!