Sirona CEREC SpeedFire - Job Archive; Settings

65 71 165 D3639
18 D3639.201.01.02.02 10.2016
3Product description Sirona Dental Systems GmbH
3.2Explanation of the symbols Operating Instructions CEREC SpeedFire
3.2.2 Job archive
The "Job Archive" contains new, processed, deleted and canceled jobs.
You can permanently delete the jobs or send them to the job list again.
1. To process the jobs, go to the overview via information (symbol "i") /
"Job Archive" .
2. Select the job to be processed here and press "Next" ("Start"
symbol).
 You will then see all possible processing steps displayed.
3. Confirm the processing step by tapping it.
4. You can go back to the job list by tapping the symbols "Step back"
and "Home".
The multi-select option is enabled here automatically.
3.2.3 Settings
The Settings menu includes the following sub-menus:
●
"LAN-Settings"
● "WLAN-Settings"
● "Service"
● "basic settings"
LAN settings
You can switch from a static to an assigned IP address here.
WLAN settings
You can change the settings for your wireless connection here.
Service
Service functions such as the temperature test, log files and calibrate are
only used with the support of customer services or a trained service
technician.
● Temperature test
● Logfiles
● Door open and close
● Calibration
● Factory settings
Use this option to reset the unit to factory settings. All saved data is
lost in this process.
Basic settings
You can select the unit of temperature, the time, date and language here.