Sirona CEREC SpeedFire - In Case of Damage; Connecting the Unit; Connection of External Equipment

65 71 165 D3639
12 D3639.201.01.02.02 10.2016
2Safety instructions Sirona Dental Systems GmbH
2.2Connecting the unit Operating Instructions CEREC SpeedFire
2.1.5 In case of damage
In case of noticeable malfunctions or damage, stop using the instrument
immediately and notify your authorized dealer or the manufacturer.
2.2
Connecting the unit
Description
Perform connection by following the directions given in the present
operating instructions.
2.3
Connection of external equipment
If any equipment not approved by Sirona is connected, it must comply
with the applicable standards:
● EN 60 950 for information technology equipment, and
● EN 61 010-1 for laboratory equipment.