Sirona CEREC SpeedFire - Setup and Connection

65 71 165 D3639
26 D3639.201.01.02.02 10.2016
4Transport and commissioning Sirona Dental Systems GmbH
4.4Scope of delivery and accessories Operating Instructions CEREC SpeedFire
4.4
Scope of delivery and accessories
● Furnace
● Power cable
● Restoration holder (“Glazing Support Single Unit” and “Glazing
Support Multi Unit”)
● Top and bottom door insulation
● Positioning pin for door insulation
● CEREC SpeedPaste
● CEREC Zirconia Shade Guide
●Tweezers
● USB-WLAN adapter
● Ferrite core
● Network cable
Product safety with the power cable
In order to ensure product safety, this device may be operated only with
original Sirona accessories or third-party accessories expressly approved
by Sirona. In particular, only the power cable supplied with the unit or the
corresponding original spare part may be used with the unit. The user is
responsible for any damage resulting from the use of non-approved
accessories.
4.5
Setup/connection
4.5.1 Transportation without packaging
Fragment: Transport without packaging
Transportation without packaging
CAUTION
Damage to the unit or risk of injury during transport without packaging
There is a danger of the unit falling down if it is grasped by its plastic
housing.
➢ Do not grasp the unit by its plastic housing.
➢ Always grasp the unit by its chassis next to its feet.