Sirona CEREC SpeedFire - Technical Data

65 71 165 D3639
20 D3639.201.01.02.02 10.2016
3Product description Sirona Dental Systems GmbH
3.4Technical data Operating Instructions CEREC SpeedFire
3.4
Technical data
Technical data for the CEREC SpeedFire
Model designation: CEREC SpeedFire
Type of protection against electric shock: Protection Class I device
Degree of protection against ingress of water: Ordinary device (without protection against ingress of
water)
Setup location: Indoors in dry area
Operating altitude: ≤ 2000 m above sea level
Temperature range: 5°C to 35°C (41°F to 95°F)
Relative humidity max. 80%
Pollution degree: 2
Mode of operation Continuous operation
Dimensions of unit (W x H x D in mm): 250 x 425 x 425
Dimensions of packaged unit (W x H x D in mm): 400 x 600 x 500
Furnace chamber: Diameter 38 mm x 20 mm height
Maximum sintering temperature: 1600°C (2912°F)
Approx. weight without packaging: 21 kg
Approx. weight including packaging: 30 kg
Rated line voltage: AC 100V - 240V
Rated power frequency: 50/60Hz
Admissible line voltage fluctuations: ±10% of nominal voltage
Power consumption: max. 1200 W
Interfaces: 2x USB 2.0
1x LAN (RJ45)
WLAN (optional via WLAN USB dongle)