Sirona CEREC SpeedFire - Job List and Multi-Select

65 71 165 D3639
34 D3639.201.01.02.02 10.2016
4Transport and commissioning Sirona Dental Systems GmbH
4.6Commissioning Operating Instructions CEREC SpeedFire
4.6.7 Job list and multi-select
Once jobs have been successfully processed in your CEREC MC/MC X
or MCXL, the heat treatment jobs are automatically sent to the furnace. A
CEREC SpeedFire must be connected for the automatic transfer of jobs.
All jobs are displayed in the main view of the furnace app. You will have
the option of selecting your job based on the material, patient ID,
processing date, or tooth number, and then starting the process.
Multi-select icon
If you wish to work on several jobs during one process, enable the multi-
select option via the multi-select button to select multiple jobs. It is only
possible to work on several jobs during one process if the material and
size of the restoration are the same as for the first selected job.
As soon as you have activated the first job, other jobs will only remain
visible if they can also be worked on during the same process.