SKF MAX-1-2-230-IF105-R-V2 Assembly Instructions

4
Appendix to Declaration of Incorporation in accordance with 2006/42/EC, Annex II, No. 1 B
Description of the essential health and safety requirements according to 2006/42/EC, Annex I, which have been applied and
fulfilled. Any essential health and safety requirements not listed here are not relevant to this product
Table 1
Appendix to Declaration of Incorporation
Valid for: MAXILUBE changeover valve units
No.:
Essential health and safety requirement
Applicable:
Fulfilled:
1.1.1
Definitions
Yes
Yes
1.1.2
Principles of safety integration
Yes
Yes
1.1.3
Materials and products
Yes
Partially
1)
1.1.5
Design of machinery to facilitate its handling
Yes
Yes
1.2
Control systems
Yes
Yes
1.2.1
Safety and reliability of control systems
Yes
Yes
1.2.2
Control devices
Yes
Yes
1.2.3
Starting
Yes
Yes
1.2.4
Stopping
Yes
Yes
1.3
Protection against mechanical hazards
Yes
Yes
1.3.2
Risk of break-up during operation
Yes
Yes
1.3.4
Risks due to surfaces, edges or angles
Yes
Yes
1.5
Risks due to other hazards
Yes
Yes
1.5.1
Electricity supply
Yes
Yes
1.6
Servicing
1.6.1
Machinery maintenance
Yes
Yes
1.6.3
Isolation of energy sources
Yes
Yes
1.6.4
Operator interventions
Yes
Yes
1.7
Information
Yes
Yes
1.7.1
Information and warnings on the machinery
Yes
Yes
1.7.2
Warning of residual risks
Yes
Yes
1.7.3
Marking of machinery
Yes
Yes
1.7.4
Operating instructions/assembly instructions
Yes
Yes
1) Not completely fulfilled: Hazards due to the lubricant used must be assessed by the operator on the basis of the Safety
Data Sheet (SDS) and, if necessary, protective measures must be taken.

SKF MAX-1-2-230-IF105-R-V2 Specifications

General

Brand	SKF
Model	MAX-1-2-230-IF105-R-V2
Category	Water Pump
Language	English