268
229042ABA SJ46 AJ+, SJ46 AJ, SJ51 AJ
Section 5 – Procedures Axles
5.10-4 Check the Oil Level in the Axle
Gearbox
1. Remove the fill plug
1
from the gear box.
2. Check the oil level. It should be even with the
bottom of the fill plug hole. Add oil if needed.
Refer to 2.12 Hydraulic & Gear Oils. for oil
specifications.
5.10-5 Change the Oil in the Axle Gearbox
1. Place a suitable container under the gearbox.
2. Remove the fill plug.
3. Remove the drain plug to allow oil to drain into
the container.
Drain Port
Fill/Check Port
4. Reinstall the drain plug.
NOTE
The gearbox is full when oil is leaking from the
check port.
5. Refill the gearbox with new oil as per
specifications. Refer to 2.12 Hydraulic & Gear
Oils.
6. Reinstall the fill plug.
1
To order go to Discount-Equipment.com
To Next Page
Loading...
Need help?
General
