Skyjack SJ519 TH - Page 17

SJ519 TH 216939ADA
17
Safety Precautions Section 2 – Operator Safety
DO NOT lower the boom
unless the area below is clear of
personnel and obstruction.
DO NOT elevate the boom while
the telehandler is on a truck,
forklift or other device or vehicle.
ENSURE that there are no
personnel or obstructions in the
path of travel, including blind
spots.
BE AWARE of blind spots when
operating the telehandler.
ALWAYS keep head, arms,
hands, legs and all other body
parts inside the operator’s cab.
Never put any part of the body
between any moving component
and another obstacle including
but not limited to: the load
handling structure; the reach
mechanism; the rough terrain
forklift truck attachment
AVOID jerks and sudden stops.
AVOID entanglement with ropes,
cords or hoses.
BE AWARE of all obstructions
while traveling.
USE CAUTION when boom is
fully extended. The further out the
boom is extended, the less load
telehandler can support.
USE CAUTION when placing
loads at high elevations and on
downhill slopes.
IF OPERATION IN AREAS
WITH HOLES OR DROP-
OFFS IS ABSOLUTELY
NECESSARY, ensure that all
four wheels have contact with firm
surface. After boom elevation,
the drive function must not be
activated.
TRAVEL SLOWLY over rough
terrain.
KNOW the weight of the load you
are transporting. Never lift more
than the lifting capacity at any
given extension or elevation of the
boom as listed on the capacity
charts.
CHECK for cracks and signs of
stress.