Skyjack SJ519 TH - 12 Operators Cab Controls

SJ519 TH 216939ADA
43
Visual & Daily Maintenance Inspections Section 4 – Pre-operation
4.2-12 Operator’s Cab Controls
WARNING
Ensure that you maintain three points of contact to
mount/dismount the cab.
▪
Use the steps of telehandler to access operator’s
cab.
▪
Ensure door and windows (if equipped) are
secure and in proper working order.
▪
Ensure operator’s cab controls
1
(refer
to Section 3.3-1) are secured with no visible
damage.
▪
Ensure multi-functional joystick
2
(refer to
Section 3.3-2) is secured, movements are not
obstructed and, with no visible damage.
▪
Ensure operator’s dash controls (refer to
Section 3.3-3)
3
are properly secured, returned
to their neutral position, with no visible damage.
▪
Ensure capacity charts
4
are in place and are
legible.
WARNING
Do not operate the telehandler if capacity charts
are missing or not legible.
3
1
2
4
3