SkyWave IDP-782 - SIM Holders; Connectors; IDP-782 Connector Pin Assignment

IDP-782 - Hardware Guide
3.2.6 SIM Holders
The terminal offers two SIM card holders. The specifications for both SIM holders are the same. If using
only one SIM card, use the main SIM card holder slot on the left when facing the holders.
Parameter Value
SIM Voltage 1.8 V or 3 V standard SIM cards
Card Detection Switch connected to cellular module
3.3 Connectors
Transceiver 30 position mating connector
JAE Electronics Inc.
IL-AG5-30S-D3C1
Satellite Antenna
IMS Connector Systems
3400.SMBA.2K10.089
K-curry yellow
Cellular Antenna
IMS Connector Systems
3400.SMBA.2D10.029
D-bordeaux-violet
For detailed instructions on the connector contact crimp, assembly and extraction, refer to the
manufacturer’s website
1
. APPENDIXF provides mating cable assembly instructions and mating connector,
crimp, and tool part numbers.
3.3.1 IDP-782 Connector Pin Assignment
Table 4 maps to the layout shown in Figure 9.
1
http://www.te.com/commerce/DocumentDelivery/DDEController , document ID/document number: 411-5761,
document title: 040II SERIES MULTI-LOCK CONNECTOR MK-II 72POS.
T213, Version 02
27
© SkyWave Proprietary