IDP-782 - Hardware Guide
Figure 21: Sample SIM Card Orientation
5. Push gently until the card is all the way in (Figure 22). Use the main SIM card holder slot (Figure 23)
if using only a single SIM card.
Figure 22: SIM Card Installed
Figure 23: SIM Card Holders
6. Repeat steps 3 and 5 if a second SIM card is required.
7. Replace the SIM card door.
8. Reconnect any cables you removed earlier and connect to external power.
9. Contact your cellular data solution provider to ensure your SIM cards are operational.
4.2.5.1 LED Location and Operation
The terminal has three visible LEDs (Figure 24) to indicate status.
T213, Version 02
51
© SkyWave Proprietary
To Next Page
Loading...
