Slayer Single Group - Restore; Save Settings

Restore / Save Settings
User preferences and factory settings can be saved and recalled by four (4)
programs in this sub-menu. After completing the steps above to access the
“Advanced Setting” sub-menu, view the “Restore / Save Settings” sub-menu and
begin programs with the following the steps.
1. Swipe from left to right until the “Restore / Save Settings” sub-menu
comes into view.
2. Tap the round touch sensor to enter the “Restore / Save Settings” sub-
menu. “Up” and “down” arrows will appear on the right side of the screen.
3. Use the arrows to scroll through programs.
•
The “Save User Settings” program saves the current machine settings
as user preferences.
1. Tap the round touch sensor to enter program.
2. Use the arrows to toggle between “NO” and “YES”, then use the
round touch sensor to confirm desired action.
‣
“NO” will be confirmed by returning to the “Restore / Save
Settings” sub-menu.
‣
“YES” will be confirmed by displaying “[DONE]”, then returning
to the “Restore / Save Settings” sub-menu.
•
The “Restore User Settings” program overwrites the current machine
settings and restores saved user preferences.
1. Tap the round touch sensor to enter program.
2. Use the arrows to toggle between “NO” and “YES”, then use the
round touch sensor to confirm desired action.
‣
“NO” will be confirmed by returning to the “Restore / Save
Settings” sub-menu.
‣
“YES” will be confirmed by displaying “[DONE]”, then returning
to the “Restore / Save Settings” sub-menu.
•
The “Restore Factory Tuned Settings” program overwrites all user
preferences and restores Slayer-recommended settings; tunings
specific to your machine will remain intact.
1. Tap the round touch sensor to enter program.
2. Use the arrows to toggle between “NO” and “YES”, then use the
round touch sensor to confirm desired action.
‣
“NO” will be confirmed by returning to the “Restore / Save
Settings” sub-menu.
‣
“YES” will be confirmed by displaying “[DONE]”, then returning
to the “Restore / Save Settings” sub-menu.
•
The “Restore Factory Default Settings” program overwrites all user and
Slayer preferences and restores hard-coded settings; tunings specific
to your machine will be erased.
1. Tap the round touch sensor to enter program.
2. Use the arrows to toggle between “NO” and “YES”, then use the
round touch sensor to confirm desired action.
‣
“NO” will be confirmed by returning to the “Restore / Save
Settings” sub-menu.
‣
“YES” will be confirmed by displaying “[DONE]”, then returning
to the “Restore / Save Settings” sub-menu.
36