Spare Parts
The following parts are recommended for properly servicing Slayer. The Basic Kit
will be adequate for completing most preventative maintenance tasks, whereas the
Advanced Kit is for more complex (and less common) procedures.
Additionally, all parts are referenced in the diagrams beginning on page 59.
Basic Parts Kit
Oil Light Bushing for Actuator
O-ring, Group Cap, Silicone, Dash 151
Anti-suction/Vacuum Valve, 1/4"
Copper Gasket for Anti-Suction, 1/4"
O-ring for Bushing in Steam Valve
Bushing, Teflon, Steam Valve, 15 x 10.5mm
Teflon Gasket, Steam Valve and Group Cover, 27mm
O-ring for Brass Steam Valve Pin
Shoulder Bolt Shim, Thin, Grey
Portafilter Gasket, 6.1mm
To Next Page
Loading...
