5. Thoroughly rinse portafilter with hot water, insert basket, and lock in
grouphead.
Backflushing with Water Only
Recommended once daily for commercial settings; optional for homes
When activated, the group cleaning program will automatically perform
backflush cycles to clean the group.
Parts and tools:
•
Cleaning brush or towel
•
Flat-head screwdriver
•
Blind portafilter insert
•
Portafilter
Procedure:
1. Complete “General Group Cleaning” steps 1-4 above.
2. Replace portafilter basket with blind insert and lock in grouphead.
3. Tap the round touch sensor near the center of the screen to activate
the menu.
4. Swipe from left to right until the “Group Cleaning” setting comes into
view.
5. Tap the round touch sensor to activate cleaning program. A timer will
appear, count down from “5”, and the program will begin. As the
program runs, another timer will appear to indicate its progress,
counting down from “150”.
6. After cleaning program, follow prompt on screen, removing portafilter
from grouphead and tapping the round touch sensor to continue. The
group will begin rinsing automatically and a timer will appear, counting
down from “15”.
7. Follow prompt on screen, removing portafilter from grouphead and
tapping the round touch sensor to continue.
8. Remove blind insert from portafilter and use a clean, damp towel to
wipe oil and grounds from portafilter body.
9. Thoroughly rinse portafilter with hot water, insert basket, and lock in
grouphead.
Backflushing with Espresso Machine Cleaner
Recommended once daily for commercial settings; once weekly for homes
Parts and tools:
•
Replacement shower screens (part #46000-50070)
•
Replacement dispersion screws (part #46000-50080)
•
Cleaning brush or towel
•
Flat-head screwdriver
•
Approved espresso machine cleaner
•
Blind portafilter insert
•
Portafilter
To Next Page
Loading...
Need help?
General
