CHAPTER 3
USING YOUR DOCUMENT CAMERA
27 smarttech.com/kb/171225
Feature description Camera mode Computer Pass-
Through mode
Playback mode
Control the document camera from a
computer
Yes Yes No
Capture to SMARTNotebook
software
Yes No No
Capture to an SD/SDHC memory card Yes No No
Access the related on-screen display
menu
Yes No No
Capture to a USB drive Yes No No
The following table describes outputs when your document camera is connected to a display with
HDMI, USB, or Composite Video Out.
Feature description Camera mode Computer Pass-
Through mode
Playback mode
Connect to a projector or display
(HDMI and USB output)
Camera image HDMI IN Memory card
images
Connect to a USB output projector or
a display
Camera image N/A Memory card
images
Connect to a TV (composite video
out)
Camera image N/A Memory card
images
Setting document camera modes
Setting your document camera to Camera mode
To set your document camera to Camera mode
1. Connect your document camera to your computer with the USB cable.
2. Set the TV/RGB to RGB on the right side of the connection panel.
3. Connect your document camera to a projector, monitor, or TV with an HDMI cable.
4. Press the CAMERA/PC button on the control panel.
OR
Press the CAMERA button on the remote control.
To Next Page
Loading...
