SMART 550 - Recording a Video on an SD Card; Transferring Images to Your Computer

CHAPTER 4
USING YOUR DOCUMENT CAMERA IN CAMERA MODE
43 smarttech.com/kb/171225
To capture images to memory
1. Set your document camera to Camera mode (see Page13).
2. Position your document camera.
3. Adjust the camera settings using the Camera mode’s OSD menu (see Page33).
4. Press the CAP/DEL button on the control panel.
OR
Press the CAPTURE button on the remote control.
Recording a video on an SD card
You can record a video with your document camera and save the recording to an SD card.
To record a video on an SD/SDHC card
1. Insert an SD/SDHC card in your document camera's SD/SDHC card slot.
2. Press the MENU button on the control panel or remote control.
The OSD menu appears.
3.
Press the button on the control panel or remote control to navigate to the Setting tab.
4.
Press the button on the control panel or remote control to navigate to the Storage, and
then press the button on the control panel or remote control.
The document camera detects the SD/SDHC card.
5. Press the RECORDING button on the control panel to start recording.
OR
Press the RECORD button on the remote control to start recording.
6. Press the RECORDING button on the control panel to stop recording.
OR
Press the RECORD button on the remote control to stop recording.
Transferring images to your computer
You can transfer images from your external storage device to your computer.