Chapter 5
47 smarttech.com/kb/171225
Chapter 5: Using your document camera in
Playback mode
Setting your document camera to Playback mode 47
Using the OSDmenu in Playback mode 48
Navigating the OSD menu in Playback mode 48
Using Playback mode OSD menu options 49
This chapter explains how to use your document camera in Playback mode.
Setting your document camera to Playback mode
When you set your document camera to Playback mode, you can connect to a display or a
projector and play back the images or videos from an SD/SDHC card or the internal memory.
Browse through the stored images and display captured images individually or as a slide show.
NOTE
When your document camera is in Playback mode, connect to a display or projector using an
HDMI cable and ensure that the images you want to show are stored using an internal or external
memory source.
While in Playback mode the document camera uses the video output, which disables your ability
to access live images and USB functions.
To play back content from an SD/SDHC card
1. Connect your document camera to a display or projector. See Connecting to different
displays on page15.
2. Insert an SD/SDHC card into your document camera. See Using an SD/SDHC card on page29.
3. Press the PLAYBACK button on the control panel or remote control.
To Next Page
Loading...
