SMART 550 - Navigating Playback OSD Menu and Managing Media

CHAPTER 5
USING YOUR DOCUMENT CAMERA IN PLAYBACK MODE
48 smarttech.com/kb/171225
Using the OSDmenu in Playback mode
Use the Playback mode OSD menu to view and select your source storage location and control
how the stored images are displayed.
Navigating the OSD menu in Playback mode
To navigate the OSD menu in Playback mode
1. Insert an SD/SDHC card into the document camera.
2. Set your document camera to Playback mode. Press the PLAYBACK button on the control
panel or remote control.
3. Press the MENU button on the control panel or remote control.
The OSD menu appears.
4.
Press the and buttons on the control panel or remote control to navigate between
functions in the menu list.
5.
Press the and buttons on the control panel or remote control to choose a selection in
the menu list.
6.
Press the button on the control panel or remote control to make a selection.
7.
Press the button on the control panel or remote control to enter a sub-menu.
8.
Press the button on the control panel or remote control to return to the previous menu
level.
9. Press the MENU button on the control panel or remote control to exit the menu.