CHAPTER 2
GETTING STARTED
17 smarttech.com/kb/171225
Turning your document camera on and off
After your completed the basic connections, you are ready to turn the document camera on and
off.
To turn on your document camera
Press the power button on the control panel or remote control.
The power indicator light changes from flashing red to solid green.
To turn off your document camera
Press and hold the power button for three seconds on the control panel or remote control.
The power indicator light changes from solid green and then turns off.
NOTE
o
If you press and hold the power button for less than three seconds the document
camera will enter standby mode.
The power indicator light changes from solid green to solid red.
Connecting to a wireless network
The document camera's WiFi capability allows you to connect to a wireless network from
anywhere in the classroom.
Create a collaborative learning environment where you can import and export images and videos
while recording and sharing your lessons.
Connect your document camera to WiFi and present images and videos from anywhere in the
classroom. Before trying to connect to a wireless network, connect the WiFi dongle to the WiFi port
on the rear panel of your document camera.
IMPORTANT
Before setting up a WiFi connection for the first time, make sure your document camera is
connected to a display.
To Next Page
Loading...
