SMART 550 - Using Microscope with SMART Notebook; Connecting to SMART Document Camera Software

CHAPTER 6
USING YOUR DOCUMENT CAMERA WITH SMART SOFTWARE
55 smarttech.com/kb/171225
Option Description
Additional
settings
l
Start Microscope Mode
l
Stop Microscope Mode
l
Rotate 180 degrees
l
Covert to Color
l
Convert to Black and White
l
Convert to Positive
l
Convert to Negative
l
Automatically Start Mixed Reality Tools
Using a microscope with SMART Notebook
software
To use a microscope with SMART Notebook software
1. Connect your document camera to your computer. See Connecting to external devices on
page19.
2. Open the SMART Document Camera window.
3. Press Additional Settings on the SMART Document Camera window menu bar, and then
select Start Microscope Mode.
4. Press Additional Settings, and then select Stop Microscope Mode when you’re done.
Connecting your document camera to SMART
Document Camera software
To connect to SMART Document Camera software using a wireless connection
1.1. Power on the document camera.
2. Launch SMART Document Camera software.
3. Select the SMART menu on the top left corner and select Options.
4. Navigate to the Camera Setting tab.
5. Select My WirelessCam from Choose type of Wireless Camera.