SMART 550 - Connecting External Devices and Peripherals

CHAPTER 2
GETTING STARTED
19 smarttech.com/kb/171225
l Update your WiFi router to the latest firmware.
l Check for sources of potential interference (microwave ovens, Bluetooth devices, faulty
satellite television cables, power lines, cordless telephones, wireless speakers, flat-panel
televisions, etc).
l Please check with your System or Network Administrator to make sure that the ports are not
blocked in the WiFi router. The TCP/UDP ports in use are as follows:
Port TCP/UDP Usage Descriptions
1900 UDP uPnP SSDP
Package
For detecting and removing the document camera
9527 TCP Command To send/receive commands between an iPad and the
document camera
9528 TCP Command To register connections for an occupied document
camera
8557 TCP RTSP To connect to the RTSP Stream
Random RTP RTP For RTP connection
Random RTCP RTCP For RTCP connection
Connecting to external devices
You can connect your document camera directly to the following external devices:
l Microscope
l Microphone
l Speakers
Connecting your document camera to a microscope
Connect your document camera to a microscope to examine microscopic objects on a bigger
screen.
To connect a microscope
1. Select the appropriate rubber coupler size for the microscope eyepiece and insert it in the
microscope adapter.