CHAPTER 6
USING YOUR DOCUMENT CAMERA WITH SMART SOFTWARE
56 smarttech.com/kb/171225
6. Select the IP button.
7. Enter your IP information and select OK.
IMPORTANT
Ensure your computer is connected to the same WiFi network (SSID) as the document
camera.
8. Select the OK button to apply the updates.
9. Place the object you want to display under the camera.
For more information on network recommendations see Connecting to a wireless network on
page17.
To connect to SMART Document Camera software using a wired connection
1. Connect your document camera to your computer using the provided USB cable.
2. Power on the document camera.
3. Launch SMART Document Camera software.
4. Place the object you want to display under the camera.
Navigating SMART Document Camera software’s
Viewer menu options
Once your document camera is connected to SMART Document Camera software you can easily
capture and adjust images.
The following options are available in the SMARTDocument Camera Viewer window.
To Next Page
Loading...
