CHAPTER 4
USING YOUR DOCUMENT CAMERA IN CAMERA MODE
32 smarttech.com/kb/171225
IMPORTANT
Your document camera must be connected to a display when using the OSD menu.
Switching to Camera mode
To switch to Camera mode
1. Connect your document camera to a projector or flat-panel display with the appropriate
cable.
2. Press the CAMERA/PC button on the control panel.
OR
Press the CAMERA button on the remote control.
Displaying objects
To display objects
1. Press the CAMERA/PC button on the control panel.
OR
Press the CAMERA button on the remote control.
2. Place the object you want to display under the camera.
3. Rotate the camera head to aim the lens at your object.
Recording a video
To record a video
1. Insert an SD/SDHC card or USB drive into the appropriate receptacle.
2. Press the RECORDING button on the control panel to start recording.
OR
Press the RECORD button on the remote control to start recording.
To Next Page
Loading...
