HRX-OM-Q026-B
Chapter 5 Display and setting of various functions
5.20 Alarm customizing function HRSH Series
5-66
Changing of dust-proof filter maintenance Setting and checking
46. Press the [SEL] key once.
The set screen of the changing of dust-proof filter maintenance is displayed on the
digital display.
SV
47. Select the changing of dust-proof filter maintenance from the table below with [▲] key
or [▼] key, and confirm by pressing “SEL”.
Table 5.20-31 List of set value
Set value Explanation
Initial value
(Default setting)
This alarm signal is not detected.
○
Operation continues when this alarm signal is
generated.
Changing of dust-proof filter maintenance Setting and checking
48. Press the [SEL] key once.
The set screen of the changing of dust-proof filter maintenance is displayed on the
digital display.
SV
49. Select the changing of dust-proof filter maintenance from the table below with [▲] key
or [▼] key, and confirm by pressing “SEL”.
Table 5.20-32 List of set value
Set value Explanation
Initial value
(Default setting)
This alarm signal is not detected.
○
Operation continues when this alarm signal is
generated.
To Next Page
Loading...
