SMC Networks HRSH200-A*-20 Series User Manual

HRX-OM-Q026-B
Chapter 5 Display and setting of various functions
5.21 Communication function HRSH Series
5-82
Digital output signal 2 selected alarm Setting and checking
55. Press the [SEL] key once.
The set screen of contact output signal 2 selected alarm is displayed on the digital
display.
PV
SV
56. Select contact output signal 2 selected alarm from the table below with [▲] key or [▼]
key, and confirm by pressing “SEL”.
Table 5.21-29 List of set value
Set value Explanation
Initial value
(Default setting)
Setting/checking are not available unless the
function setting of digial output 1 is selected
alarm status signal.
to
Sets selected alarm
Set range is AL.01 to AL.48.
Contact output signal 3 function Setting and checking
57. Press the [SEL] key once.
The set screen of contact output signal 3 function is displayed on the digital display.
PV
SV

SMC Networks HRSH200-A*-20 Series Specifications

General

Brand	SMC Networks
Model	HRSH200-A*-20 Series
Category	Chiller
Language	English