SMC Networks HRSH200-A*-20 Series - Page 31

HRX-OM-Q026-B
Chapter 3 Transport and Setting Up
HRSH Series 3.3 Installation
3-13

Preparation for operation
1. Remove four screws to remove the front panel for the electrical unit.
Fig. 3-6 Remove the front panel for the electrical unit
2. Hold the handle and put up the front panel of the electrical unit, and remove it.
Fig. 3-7 Remove the front panel of the electrical unit
Handle
A
Screw
Front panel for the
electrical unit
In case of HRSH
∗
∗∗-A∗-40-∗
OFF
Note: Please turn off the
breaker handle. The
front panel of the
electrical unit cannot
be removed without
turning off the breaker.