SMC Networks LECP6 Series - Power Supply Plug; Power Supply Plug Specifications and Wiring

- 22 -
5. CN1: Power supply plug
5.1 Power supply plug specifications
.
Power supply plug
󳙧Power supply connector󳙨
LEC-D-1-1󳞥FK-MC0.5/5-ST-2.5󳞷Manufactured by Phoenix Contact󳞦
5.2 Electric wire specifications
Item
Specifications
Applicable wire size
(Single line, stranded wire, stranded wire with
bar terminal (without insulation sleeve))
AWG20 (0.5mm
2
)
Cable sheath O.D. ø2.0mm or less
The rated temperature for the insulation coating:
60
o
C or more
Stripped section length
Please insert only the peel line part when insert the electric wire in the power plug.
Caution
Multiple electric wires should not be connected to one terminal.
Arrange wiring so that conductors of each terminal do not contact other lines.
0V
M24V
C24V
EMG
BK RLS
Terminal
Function
Descriptions
0V
Common power (-)
The negative common power for M24V,
C24V, EMG and BK RLS.
M24V
Motor power (+)
The positive power for the electric actuator
motor to be supplied via the controller.
C24V
Control power (+)
The positive control power.
EMG
Stop signal (+)
The positive power for Stop signal.
(Motor is can operate to connect the 24V.)
BK RLS
Lock release (+)
The positive power for lock release.
8mm