SMC Networks LECP6 Series User Manual

- 26 -
24V
0V
Controller
power supply
Controller
power supply
(2) Example circuit 2 - multiple controllers
If the system where this controller is installed has a stop circuit for whole system, or if the system has
multiple controllers with individual power supply, relay contacts should be made between the 24 VDC
controller power supply and the EMG terminal of the power supply plug.
Caution
When shutdown is input, the controller stops with maximum deceleration, then the motor is turned off.
24V
0V
BK RLS
EMG
C 24V
M 24V
0V
Power supply plug
(the 1
st
controller)
Power supply plug
(the 2
nd
controller)
Power supply plug
(the 3
rd
controller)
24V
0V
Controller
power supply
(Circuit example: The figure below shows the stopped state.)
24 VDC
Ry
0V
stop switch
Ry
Surge suppressor
Reset switch
for stop
Ry
Ry
Ry
BK RLS
EMG
C 24V
M 24V
0V
BK RLS
EMG
C 24V
M 24V
0V

SMC Networks LECP6 Series Specifications

General

Brand	SMC Networks
Model	LECP6 Series
Category	Controller
Language	English