SMC Networks LECP6 Series - Parallel I;O Connector

- 28 -
6. CN5: Parallel l/O Connector
6.1 Parallel I/O specifications
● Input specifications ● Output specifications
6.2 Parallel I/O type (NPN/ PNP type)
There are two types of parallel I/O for this controller: NPN type (LECP6N□□-□) and PNP type
(LECP6P□□-□).
(1) Parallel I/O input circuit (same for both NPN and PNP type)
NPN type
PNP type
(2) Parallel I/O output circuit
●NPN type
●PNP type
No.
Item
Specification
1
Output circuit
Internal circuit and photo
coupler Isolation
2
Number of outputs
13 outputs
3
Max. voltage between
terminal
30VDC
4
Max. output current
10mA supply/sink
5
Saturation voltage
2.0V (Max.)
No.
Item
Specification
1
Input circuit
Internal circuit and photo
coupler isolation
2
Number of
inputs
11 inputs
3
Voltage
24 VDC +/- 10%
4
Input current at
ON
3.5mA +/- 20%
(at 24 VDC)
5
Input current /
voltage at OFF
Current 1.5 mA or less
Voltage 11V or less
(a)
(b)
Inside of the controller
(a)
󳙣COM+󳙤󳙟A1󳙠
(b)
IN0󳙟A3󳙠-SVON󳙟A13󳙠
(a)
󳙣COM-󳙤󳙟A2󳙠
(b)
IN0󳙟A3󳙠-SVON󳙟A13󳙠
Outside
OUT0󳙟B1󳙠
-ALARM󳙟B13󳙠
OUT0󳙟B1󳙠
-ALARM󳙟B13󳙠
󳙣COM-󳙤
󳙟A2󳙠
󳙣COM+󳙤
󳙟A1󳙠
Inside of the controller
Outside
Inside of the controller
Outside
10Ω
10Ω
6.8kΩ
1kΩ