C
HAPTER
5
| Monitoring the Switch
Displaying Basic Information About the System
– 198 –
◆ Level – Error level as described above.
◆ Time – The time of the system log entry.
◆ Message – The message text of the system log entry.
WEB INTERFACE
To display the system log:
1. Click Monitor, System, Log.
2. Specify the message level to display, the starting message ID, and the
number of messages to display per page.
3. Use Auto-refresh to automatically refresh the page at regular intervals,
Refresh to update system log entries starting from the current entry ID,
or Clear to flush all system log entries.
Use the arrow buttons to scroll through the log messages.
|<< updates the system log entries, starting from the first available
entry ID, << updates the system log entries, ending at the last entry
currently displayed, >> updates the system log entries, starting from
the last entry currently displayed, and >>| updates the system log
entries, ending at the last available entry ID.
Figure 86: System Log Information
To Next Page
Loading...
Need help?
General
