26
8 • Bar pressure (S560NA)
By pressing the key the following message will be displayed:
Fig. 4.7.3
This parameter increases or decreases the sealing pressure.
The keys and allow you to modify the value by 1 unit (value 0 to 10).
9 • Bell release (S560NA)
By pressing the key again, the following message will be displayed:
Fig. 4.7.4
The parameter "hood release" determines how much the bell should open during the heat-
shrinking phase; in this way, you avoid the film being blocked between the bell and the sealing
bar, which would prevent a perfect heat-shrinking.
The parameter is active only when the automatic machine carries out the heat-shrinking.
The keys and allow you to modify the value by 1 unit (value 0 to 10).
4.8 PARAMETERS STORAGE IN THE HIDDEN MENU
In order to save any modifications in the hidden menu, please press the key .
Recommended value:3
To Next Page
Loading...
