25
Use and maintenance manual S440-S560-S560N-S560NA-S870
- If a value higher than 0,5 is set up, the bell unit descent time is delayed from the moment
which the conveyor stops.
Therefore, if you increase the value "auto cycle" the bell opening and closure speed decreases.
The display will indicate the packs per minute that can be packaged with the set values.
Fig. 4.6.7
In order to stop the automatic cycle, press any key on the electric board; in order to start the
machine again, press the push-button START.
4.7 HIDDEN MENU
By pressing the keys and simultaneously, you enter the hidden menu with the
adjustment parameters which were set during the machine commissioning.
Fig. 4.7.1
If you enter the password PROGR you have access to the adjustment of the below mentioned
parameters:
(In order to enter the password, please select the letters with the keys and ;each
letter must be confirmed by pressing the key )
7 • Language
Menu to select the language
Fig. 4.7.2
By using the keys and it is possible to display all available languages (English,
French, German, Spanish, Portuguese, Dutch, Czech, Polish, Hungarian).
packaged/minute
To Next Page
Loading...
