33
Use and maintenance manual S440-S560-S560N-S560NA-S870
• Inflammable products.
• Explosive products.
• Aerosol bombs of any kind.
• Loose powders and volatile products.
• Loose products with a format smaller than the netting holes.
It is not possible to package anything that is not foreseen which can in any way be
dangerous to the user and damage the machine itself.
5.6 DANGEROUS AREAS
• Do not touch the sealing blade immediately after a packaging operation, going over the
protection barrier against burns caused by the bar residual heat.
• Do not use the machine if the sealing blade is broken.
• Do not touch the storage unit closing vane during the heating stage, danger of burns.
• Do not touch the moving fan or use the machine without netting.
• When the machine is switched off leave the bell always open.
6. MACHINE INSPECTION
Scrap recovery
outlet
Inspection of the
automatism unit (S560NA)
Inspection of the
automatism unit (S560NA)
Inspection of the electrical installation
To Next Page
Loading...
