Snap-On MODIS - Deleting Saved Files; Copying and Moving Saved Data

33
Operations Save Data
NOTE:
i The Keep Entries options are only available when first saving the file.
z To exit Edit Data screen:
• Press N/X to return to the main menu.
5.7.4 Deleting Saved Files
The DELETE button lets you delete saved test data.
z To delete files:
1. From the main menu, select Save Data > Data Management.
The Data Management screen displays.
2. Use the up b and down d arrows to highlight a file from the list on-screen.
3. Use right c and left e arrows to select DELETE from the upper toolbar.
A confirmation message displays (Figure 5-10).
Figure 5-10
Sample Delete file confirmation message
4. Permanently erase the data from memory by pressing Y/a, or press N/X to cancel.
NOTE:
i Factory-installed files cannot be deleted.
5.7.5 Copying and Moving Saved Data
The COPY and MOVE functions let you transfer saved test data from one CF card to the other.
z To copy or move data:
1. From the main menu, select Save Data > Data Management.
The Data Management screen displays.
2. From the upper toolbar, select SETUP.
The Save Data dialog box displays.
3. Set Internal as the Save To option and press N/X to close the dialog box.
The test data saved to the internal memory displays.
4. Use the up b and down d arrows to highlight a file from the list on-screen.
5. Use right c and left e arrows to select COPY or MOVE from the upper toolbar.
A confirmation message displays.