Snom D735 - Page 58

58
D735 User Manual Using the Phone
Fig. 1 Fig. 2 Fig. 3
2. Dial the number you want to transfer the call to and announce the call (Fig. 2). You can also
select a number from the internal or one of the available external phone directories (see
"Calling number from phone directory" on page 49 and "Calling number from external
directory" on page 49).
3. If the third party wants to accept the call, press
. The "holding 7750" screen appears
(Fig. 3).
4. Press
to complete the transfer. You may briefly see the messages "Disconnected 7793"
(Fig. 5) and "Disconnected 7750" (Fig. 5 and 6 below, indicating that the transfer was
completed.
• With more than one call. All calls must be on hold. In the below example you have two calls from
phone numbers 7781 and 7750 on hold. You want to transfer the call from 7750 to 7793.
1. Dial 7793 and announce the call.
2. If the third party wants to accept the call, press
. If the "holding 7781" screen, i.e., the call
you do not want to transfer, appears on-screen (Fig. 4), press
to bring "holding 7750"
on-screen (Fig. 5).
Fig. 4 Fig. 5
3. Press . You may briefly see the messages "Disconnected 7793" and
"Disconnected 7750" (Fig. 5 and 6), indicating that the transfer was completed.
Fig. 5 Fig. 6 Fig. 7
The remaining call on hold or the first of the remaining calls on hold will then appear on-
screen (Fig. 7).