Snom D735 - Programming the Function Keys; Function Key Settings on the Phone

71
D735 User Manual Configuring the Function Keys
2, Extension monitoring and call pick-up on D7 expansion module" on page 77 and the D7 user
manual available at http://wiki.snom.com/Snom_D7/Documentation.
Fig. 7 - Function keys of connected D7 expansion module
Programming the function keys
The freely programmable function keys on the phone and on all connected expansion modules can
be mapped on the phone and on the phone's web interface. We recommend using the web interface
which is faster and more comfortable.
Function key settings on the phone
On the phone, a limited number of functionalities is available.
1. Press
> Preferences > Fkeys (Fig. 1).
Fig. 1 Fig. 2 Fig. 3
2. Select SmartLabel Keys (Fig. 2).
3. Select Page 1, 2, 3, or 4, respectively, by scrolling to the respective page and pressing
(Fig. 3).
In the following example, we will be configuring key 17 on page 3.
Fig. 4 Fig. 5
4. Select the key and press to open the Key 17 Function menu (Fig. 4). The selected key flashes yellow
if the SmartLabel key page with the key to be configured is on-screen (Fig. 5 – press
to page).