Snom D735 - Call waiting

95
D735 User Manual Customizing the Phone Settings
Call waiting
Default setting: When in a call, another call coming in is announced visually in the status line and
acoustically by a double beep. See "Call waiting" on page 53 on how to use this feature. Available
settings:
◦ On: Visual and acoustic announcement of calls waiting
◦ Visual only: Visual announcement of calls waiting in the status line
◦ Ringer: Acoustic announcement by double beeps
◦ O: The call waiting is not announced visually or acoustically; callers hear the busy signal.
Call waiting is set independently for each identity. If you use the phone to change the setting, it will
apply to the current outgoing identity only; if you want it to apply to any other identities on the phone,
you must select each one in turn as the outgoing identity and repeat the setting for each one.
Setting on the phone
The setting is applied to the outgoing identity at the time it is saved. If you want to change the setting
for other identities, select each one as the outgoing identity in turn and repeat the steps.
1. Press
> Call Features > Incoming Calls > Call Waiting.
Fig. 1 Fig. 2 Fig. 3
Fig. 4 Fig. 5 Fig. 6
◦ To turn call waiting on and o, select Call waiting and press (Fig. 1 and 2). When call
waiting has been turned o, Indicator is no longer available in the menu (Fig. 1).
◦ To change the way call waiting is announced, select Indicator and press
(Fig. 3). The
Indicator menu appears (Fig. 4). Select a setting (Fig. 5) and press
to save the change and
return to the Call waiting menu (Fig. 6). The Indicator setting now indicates the new setting,
for example, if you changed the default setting of "visual & ringer" (Fig. 5) to "visual only"
(Fig. 6).
2. Press
briefly to return to the Incoming calls menu, press for two seconds to return to the idle
screen.