66
D735 User Manual Using the Phone
Press
Forward All Forward when Busy Forward after Timeout
Press
or Enable forwarding or Enable forwarding or Enable forwarding
The setting will change from on to o, and the settings for the forwarding target and, in the
case of timeout, for the time span will disappear.
Press for two seconds to return to the idle screen.
Turning forwarding of all calls on/o with a function key
Turning call forwarding on
Note: Call forwarding is set separately for each configured identity separately. When
the setting is done on the phone, it applies to the identity selected as outgoing identity.
1. Select the identity if there is more than one active identity.
2. Press
. The display will show the Target when Forwarding screen.
Note: If
is not available when the display is in idle mode, you can make it available
on the Function Keys page of the phone's web interface. For further information see
"Configuring the function keys", "Example 4, Changing setting of context-sensitive key"
on page 80. Default settings: See "At a glance" on page 18.
3. If no forwarding number has been set or if it needs to be changed, make the necessary entries.
4. Press
.
Turning call forwarding o:
1. Select the identity if there is more than one active identity.
2. Press the function key underneath
.
To Next Page
Loading...
