63
D735 User Manual Using the Phone
◦ Press for two seconds to reject the call and additionally place the caller on the "Deny" list of
the phone's directory so that calls from that number will never ring on your phone; the caller
will always hear the busy signal. For more information on the "Deny" list and how to edit or
remove entries from it, see "Contact Types" on page 40.
• Transferring the ringing call to another phone (blind transfer). See "Blind transfer of ringing call"
on page 60.
Automatically
There are four options for rejecting incoming calls automatically or to have them forwarded
automatically, either always or under certain conditions:
• Deny List. Calls from phone numbers on this list will not ring on your phone; callers will hear the
busy signal. For further information, see "Contact Types" on page 40.
• DND - do not disturb mode
. When this function is turned on, callers hear the busy signal.
If there is an active setting for call forwarding on busy, incoming calls will be forwarded to
the number specified in the setting. For more information, see "Preprogrammed, variably
programmable function keys" on page 21.
Exception: Phone numbers designated VIP in your phone's directory will ring on
your phone even when DND is on.
• Call forwarding. For further information, see "Call forwarding" on page 64 and 93.
• Rejecting anonymous calls: See next section.
Rejecting anonymous calls
With this setting you can have your phone reject calls from phones that are blocking or not
transmitting their numbers.
Please note: Calls from analog phone connections without caller ID will, most likely,
be received as anonymous calls. They will be rejected when you turn this function on.
Activating rejection of anonymous calls
1. Press
.
2. Select Call Features and press
.
3. Select Incoming Calls and press
.
4. Select Reject anonymous. The default setting is o (Fig. 1).
5. Press
to change the setting to on (Fig. 2). (When the function is active, pressing will turn it
o.)
To Next Page
Loading...
